Поставки высококачественного оборудования для IT и промышленной автоматизации с доставкой по всей России
ВРЕМЯ РАБОТЫ: С 8:30 ДО 19:00 ПН-ПТ
ЗАЯВКИ ПРИНИМАЮТСЯ КРУГЛОСУТОЧНО

UPS with Supercapacitor Backup

Заказать в один клик
Цена: 2 627.25 USD 2 627.25 USD
Артикул: UPS25210HR
Производитель: RTD Embedded Technologies

UPS25210HR. Купить UPS25210HR ups with supercapacitor backup от RTD

Description

The UPS35210HR is an uninterruptible power supply used to provide continuous power to a system where an unexpected brown-out condition may otherwise prevent a safe and controlled shutdown of the system, or a timely save operation necessary to prevent data-loss before properly shutting down the OS. The UPS35210HR is best paired with RTD’s supercapacitor energy storage module, which the UPS uses as the power source when a brown-out condition is detected. Details for each element are below.

UPS: The 136 Watt, delay configurable Uninterruptible Power Supply (UPS) is suitable for extended temperature applications in rugged environments. The board reports consist of power, current and voltage from the system and the battery along with remaining backup time. These status reports can be delivered over RS-232 serial port or though a USB 2.0 connection. This UPS can act as a slave, or as a standalone unit.

Energy Storage Module: The energy storage module portion of the UPS35210 is based on ultracapacitors. The module’s advantage over conventional batteries is its high-charge discharge rate, light weight, and wide temperature range. The primary use of this module is to perform short-term system backup. The ultracapacitor board works together with RTD's uninterruptible power supply and ATX3510HR190W power module (sold separately). Together, these three modules provide a robust power supply and backup solution.

Key Features

  • PC/104 form factor
  • Bus Structure Options:
    • PCIe/104 (UPS35210HR)
      • PCIe universal expansion bus (Type 1 or Type 2)
    • PCI/104-Express (UPS25210HR)
      • PCIe universal expansion bus (Type 1 or Type 2)
      • PCI pass-through expansion bus
    • Without Stackable Buses (UPS10210HR)
  • Each configuration includes two PC/104 modules:
    • One Uninterruptible Power Supply Module
    • One Supercapacitor Bank Module
  • Operating Temperature: -40 to +85°C


UPS Details

  • Input Voltage: 8 to 36 VDC
  • Battery Charge Voltage: 8 to 32 VDC
  • Battery Charge Current: 0.0 Amps to 4.0 Amps
  • Output voltage: Diode-OR of 36 V or Battery Voltage
  • Supported Chemistry: 1650 Watt Seconds Super Capacitor Bank
  • Output Control Features:
    • Global remote ON/OFF# via input header
    • Programmable delayed power ON/OFF
  • Status reporting and delay-configurable shutdown control over RS-232 serial port or USB 2.0 connection
    • Selection of USB 2.0 between PCIe expansion bus or USB Mini-B receptacle permits configuration with or without a host CPU
    • Repopulation of USB 2.0 link on the PCI Express expansion bus allows increased stack capability
  • Thermal monitoring through onboard temperature sensor
    • Thermistor connection for external temperature monitoring
  • Status LEDs

Supercapacitor Board Details

  • Energy: 2,250 Joules
  • Maximum Backup Wattage: 75 Watts
  • Backup time at Backup Wattage: 30 seconds
  • Discharge Cutoff voltage: 8.0 V
  • Max discharge current: 14.28 Amps
  • Max Charge Voltage: 13.8V
  • Absolute Max Charge Voltage: 14.0 V
  • Overcurrent threshold: 14.28 Amps

Connector Interface

  • Bus Connectors
    • PCIe/104 universal (Type 1 or Type 2)
    • PCI-104 (UPS25210HR only)
  • External I/O Connectors for UPS Module
    • Four terminal blocks
      • Power input from external source
      • Power output to system (ATX3510HR-190W, for example)
      • Power input from supercapacitor board
      • Power output to charge supercapacitor board
    • One USB 2.0 port (Mini-B Receptacle)
    • One RS-232 serial port (2x5 pin 0.1” Connector)
      • TX, RX, RTS, CTS only
    • One connector for external thermistor
  • External I/O Connections for Supercapacitor Board
    • Charging input from UPS Module
    • System power output to UPS Module
  • Onboard Sockets/Jumpers
    • On/Off input

Software

  • Monitor battery status
  • Automatically shut down the system during a low battery condition
  • Natively supported in Windows 7 or later
    • Configurable through Windows Power Options
    • Battery level and charging status monitoring via Taskbar
    • Automatic shutdown during low battery event
  • Linux support based on NUT
    • Battery level, voltage, and full status monitoring
    • Full control over when to initiate system shutdown
    • Configurable delayed power return to ensure system bring-up

Recommended Accessories

  • ATX3510HR-190W Power Supply

Physical Attributes

  • Dimensions
    • Length (L): 3.775 inches (95.89 mm)
    • Width (W): 3.550 inches (90.17 mm)
    • Total Height (assembled as shown in picture): TBD inches (TBD mm)
  • Total weight: Approximately TBD lbs. (TBD Kg)
  • Standard Operating Temperature, 90% humidity non-condensing: -40 to +85°C
  • Storage Temperature: -40 to +85°C
  • Input Power Requirements: 8 to 36 VDC

What's Included

  • UPS Module with PC/104 Stand-Off Kit
  • Energy Storage Module with plastic cover and bolts
  • Companion CD with user manuals
  • Standard 1-year Warranty
  • Note: the two modules included with the UPS35210HR / UPS25210HR / UPS10210HR are shipped unassembled. They can be mounted together as part of a standard PC/104 stack using the stand-off kit, or they can be mounted separately.
ОСТАВЬТЕ ЗАЯВКУ
и мы незамедлительно сообщим Вам
актуальные цены и сроки поставки
Если Вас интересует несколько товарных позиций, прикрепите файл с необходимым ассортиментом