Поставки высококачественного оборудования для IT и промышленной автоматизации с доставкой по всей России

Embedded DSP Controller

Заказать в один клик
Цена: по запросу 
Артикул: SPM35CPE1250HR-2048
Производитель: RTD Embedded Technologies

SPM35CPE1250HR-2048. Купить SPM35CPE1250HR-2048 embedded dsp controller от RTD

PCIe/104 Octal-Core DSP Module with rightangle SyncBus header


Based on the Texas Instruments TMS320C667x, RTD’s SPM35CP dspModules are versatile fixed/floating point embedded DSP controllers with a PCIe/104 stackable bus structure. The onboard DSP chip supports high-performance signal processing applications such as imaging, test, and automation. Deterministic processing allows the DSP to outperform general purpose processors for time-critical applications. The C6678 platform is power-efficient and easy to use. The C66x CorePac DSP is fully backward compatible with TI’s existing C6000 family of fixed and floating point DSPs.

High-speed data connections such as PCI Express, Serial RapidIO®, and Gigabit Ethernet connect the DSP to the outside world. The PCI Express connector permits the DSP to act as a co-processor to a PCIe/104 host cpuModule while 16 Mbyte of onboard flash permits true stand-alone operation of the DSP without a host. A high-speed multifunction interface enables systemlevel peertopeer data transfer. Additional hardware features include one RS-232/422/485 serial port as well as fourteen 5V-tolerant 3VTTL digital I/O.

When paired with an RTD cpuModule and a high-speed signal source/drain (e.g. RTD’s DM35418HR dataModule), the result is a complete high-speed data acquisition, signal processing, and decision-making system. The Gigabit Ethernet connections, or stackable Serial RapidIO® (which boasts four configurable lanes), are ideal for high-speed data transfers between the DSP and the mated data acquisition board or system.

The SPM35CP is available in dual-core and octal-core configurations and includes a suite of matching host-side and DSP-side libraries permitting single and multi-threaded applications for all on-board features.

Key Features

  • PC/104 form factor
  • PCIe/104 stackable bus structure
    • PCIe universal expansion bus (Type 1 or Type 2)
  • PCIe x1 interface (Gen 2, 5 GT/s)
    • Compatible with RTD's Intel Core i7-based cpuModules
  • Available in stackable, rugged enclosures
  • Texas Instruments TMS320C667x™ DSP Core Subsystems (C66x CorePacs)
    • Built for real-time, deterministic processing
    • 1.25 GHz C66x Fixed/Floating-Point CPU Core
    • Dual-core (C6672) and Octal-core (C6678) options
    • 32 KByte Level 1 Program (L1P) cache per core
    • 32 KByte Level 2 Data (L2D) cache per core
    • 512 KByte Local Level 2 cache per core
    • 4096 KByte On-chip RAM
  • 2GB or 4GB DDR3 SDRAM (surface-mounted)
    • 64 bit / 1300 MHz operation
    • Surface-mounted for maximum reliability
    • Features robust Error Code Correction (ECC)
  • 16 Mbyte SPI Flash for user bootloaders
  • Power connector and onboard flash permit stand-alone boot-mode without a CPU
  • Requires only +5V VDC for operation
  • Differential synchronous SyncBus
    • Allows multiple RTD boards to share a common clock
    • Allows the DSP to synchronize sampling of DAQ cards
    • SyncBus between boards can be connected via cable or through an on-board stacking connector
  • SPI bus with four chip selects
  • Four Serial RapidIO® ports
    • Up to 5 GT/s operation per lane
    • Supports Direct I/O, Message Passing
    • Link configurations configurable as four x1, two x2, one x4, and two x1 + one x2
  • Gigabit Ethernet
    • Supports 10/100/1000 Mb/s operation
    • Single controller with two switched connections
  • One Serial Port (RS-232/422/485)
    • Configurable as:
      • RS-232 port with TxD, RxD, CTS, and RTS
      • RS-422/485 port with TxD+, TxD-, RxD+, RxD-
    • 120 ohm termination for RS-422/485 Mode
    • Standard PC 16C550 UART Interface
  • 14 single-ended 3VTTL digital I/O
    • 5V tolerant
    • 5V, 0.5A supply current for external user hardware
  • JTAG emulator connector
    • Compatible with TI JTAG Emulators (e.g. XDS100v2)
    • Allows for program loading and low-level debugging
  • Additional Hardware Features
    • Status LED
    • Reset Button Input
    • Rotary switch selectable boot mode
  • -40 to +85°C standard operating temperature
  • Heat Sink Options
    • Thermal-optimized mini-fan heat sink included (standard)
    • Modified heat sinks and flat heat spreaders are available
    • Passive Structural Heat Sink & Heatpipes in IDAN and HiDAN System Configurations

Connector Interface

  • Stackable Buses
    • PCIe universal expansion bus (156-pin, 22 mm stack height)
    • Multifunction Interface (104-pin, 22 mm stack height)
  • External I/O Connectors
    • 16-pin header: LVDS SyncBus (see ordering options)
    • 14-pin right-angle header: TI JTAG
    • Two 10-pin right-angle headers: Gigabit Ethernet
    • 10-pin right-angle header: Serial port
    • 16-pin right-angle header: GPIO
    • 10-pin right-angle header: Utility
    • 12-pin right-angle header: +5V Auxiliary Power

Software Features

  • DSP Platform Library provides routines for low-level DSP hardware initialization
  • Network Development Kit (NDK) for Ethernet communication
  • Boot Loader for standalone operation (boot from flash)
  • Linux software for communication and control of DSP from a cpuModule
  • Example program to demonstrate DMA from RTD's DM34216HR to the SPM3xCP
  • Note: TI Code Composer Studio required for DSP software development

Recommended Accessories

  • XK-CM121 Cable Kit
  • ATX104HR-Express: 88 Watt ATX Power Supply
  • TI JTAG Emulator XDS100v2

Physical Attributes

  • Dimensions
    • Length (L): 3.775 inches (95.89 mm)
    • Width (W): 3.550 inches (90.17 mm)
    • Stand-off Height
      • Above the CPU: 0.866 inches (22.00 mm)
      • Below the CPU: 0.600 inches (15.24 mm)
  • Weight: Approximately 0.40 lb (0.18 kg)
  • Standard Operating Temperature, 90% humidity non-condensing: -40 to +85°C
  • Storage Temperature: -55 to +125°C
  • Input Power Requirements: +5 VDC
  • Power Consumption
    • DSP power consumption is heavily influenced by the running software and system activity.
      • Typical Power Consumption:
        • SPM35CPD1250HR-2048 (dual-core, 2GB SDRAM): 7.0 W
        • SPM35CPD1250HR-4096 (dual-core 4GB SDRAM): 9.5 W
        • SPM35CPE1250HR-2048 (octal-core, 2GB SDRAM): 10.0 W
        • SPM35CPE1250HR-4096 (octal-core, 4GB SDRAM): 12.5 W
      • Please refer to the hardware manual for detailed consumption scenarios.
и мы незамедлительно сообщим Вам
актуальные цены и сроки поставки
Если Вас интересует несколько товарных позиций,прикрепите файл с необходимым ассортиментом