Плата DSP акселератора в формате PCI-104

Заказать в один клик
* Внимание! Мы не работаем с физическими лицами
Цена: по запросу 
Артикул: SPM186420ER1000-32Подобрать аналог
Производитель: RTD Embedded Technologies

Key Features

  • PC/104 Form Factor
  • Stackable 120-pin PCI expansion bus
  • Stackable 80-pin PlatformBus
    • Buffered Asynchronous Memory Interface of the DSP
  • 3.3V & 5V PCI signaling compatible
  • TMS320C6416 DSP (600 MHz or 1.0 GHz)
  • 4800 MIPS operation
  • Linearly Addressable PCI Interface
  • Eight 32-Bit Instructions/Cycle
  • 2.0ns cycle time
  • 32 MB SDRAM
  • 800 MB/s memory transfer rate
  • 2 Mbytes FLASH
  • All DSP resources accessible from the PCI bus
  • VLIW instruction device
  • Watch-Dog Timer
  • Bus master or target only (Switch Enabled)
  • Complete High performance DSP accelerator module
  • 3 Multi channel Buffered Serial Port (McBSP) (max. 75Mbit/s )
  • Boot Mode: PCI, or Flash ROM Boot Mode (Switch Enable)
  • All resources of the DSP can be accessed from the PCI bus
  • TMS320™ DSP ALGORITHM STANDARD
  • Mating Connectors
    • Standard 14-pin 0.1" DIL header (JTAG)
    • Standard 12-pin 0.1" DIL header (Power)
    • Standard 10-pin 0.1" DIL header (SyncBus)
    • 3 Standard 10-pin 0.1" DIL headers (McBSP)

I/O

  • Processor
  • PlatformBus (3.3V)
    • 32 bit data
    • 16 bit address
    • Buffered Asynchronous Memory Interface of the DSP
    • High speed data transfer device between the DSP and the analog interface
  • Three Multi channel Buffered Serial Ports (McBSP):
    • Buffered Asynchronous Memory Interface of the DSP
    • High speed data transfer device between the DSP and the analog interface
    • TI/EI, MVIP, SCSA, ST bus, AC97 SPI Compatible
  • JTAG emulator connector
    • Boundary-Scan-Compatible
  • SyncBus for Synchronous operation
    • Up to 4 AIM6020HR Analog Interface Modules and/or RTD's Data Acquisition boards

Software

  • Supported under the following operating systems:
    • DOS (DPMI32)
    • Windows 98/NT4/2000/XP
    • Linux (2.4 and 2.6 kernels)
  • Includes the RTD dspFramework, a suite of libraries and example programs to simplify application development.  Key features of the RTD dspFramework include:
    • Matching host-side and DSP-side libraries
    • Standard interfaces for passing messages between the DSP and the host system
    • Ability for the host to call DSP functions
    • Support for single and multi-threaded applications (DSP/BIOS)
    • Support for on-board hardware (McBSP, SyncBus, Flash, etc)
    • DSP applications can be downloaded through the PCI bus, or programmed into the on-board flash
    • Modular design and full source code makes it possible to modify and extend the framework
  • Source code, example programs, and API documentation are included for all supported platforms
  • TI Code Composer Studio required to develop and compile DSP applications

Physical Attributes

  • Dimensions
    • Length (L): 3.775 inches (95.89 mm)
    • Width (W): 3.550 inches (90.17 mm)
    • Stand-off Height: 0.600 inches (15.24 mm)
  • Weight: Approximately 0.22 lbs. (0.10 Kg)
  • Standard Operating Temperature, 90% humidity non-condensing:
    • SPM186420HR600-23: -40 to +85°C
    • SPM186420ER1000-32: -40 to +85°C
  • Storage Temperature: -55 to +125°C
  • MTBF:
    • SPM186420HR600-32: TBD
    • SPM186420ER1000-32: TBD
  • Power Consumption (@ 5 VDC typical):
    • SPM186420HR600-32: 2.7 W
    • SPM186420ER1000-32: 5.4 W
ОСТАВЬТЕ ЗАЯВКУ
и мы незамедлительно сообщим Вам
актуальные цены и сроки поставки
Если Вас интересует несколько товарных позиций,прикрепите файл с необходимым ассортиментом

Мы ценим Ваше время и бюджет — под Ваши задачи

ПОДБЕРЁМ ОБОРУДОВАНИЕ

НЕ НАШЛИ ТОВАР?

Оставьте заявку на интересующее оборудование,
и наши менеджеры помогут Вам.